Read only content cannot be changed, no modifications will be accepted

What else should ‘Read Only’ mean? One must have applied the setting and should have known what he (f/m) does.

If needs arise to cancel protection: There are different containers of text that can be protected (tables by every singel cell; frames - just to name two examples). Thus a refined design of using protection in a document / template is possible. A global switching off of protections will not be available.

I think the documents should be analised with the help of the navigator to identify the containers concerned - and, of course, the templates should be reworked to get documents as intended.

Editing: In a comment above “jerquee” linked in a thread from another forum on LibreOffice. There “jonhayes” had attached an example file to his post. Having studied that a bit with the help of an XML-editor I think the most likely cause of the problem is carelessly pasting content copied from non-odf source and containing incompatible or unsufficiently specified field-types. For better understanding you may refer to “owengs”'s contributions to this thread. The bug in LibreOffice should be to not refuse accepting pasted contents that cannot be thoroughly validated for one or another reason. We experience just another aspect of the “compatibility dilemma” enjoyed to the full by an unfortunately powerful competitor.

I don’t know how old this chain is as a year isn’t associated with the dates but in October 2021, using Ubuntu 20.10, I’m having the same problem as the OP and I did not select any setting to lock the document or make it read only. I simple created a document with some cut and paste HTML, saved it and exported as an editable PDF.

When I closed and reopened the document I realized it wasn’t showing the outlines as when the document was being created and I noticed I could not change the typeface. I got the dreaded “read only” message when I tried typing something.

My 7.0.6.2 version doesn’t have the formatting aid option mentioned in the chain (Tools → Options → LibreOffice Writer → Formatting Aids) nor does it have Tools → Options → LibreOffice Writer →Compatibility.

I just wonder if there’s documentation from the maintainers about locking and unlocking documents.

My solution was to copy and paste all my content into a new file so as to make edits.

This software simply made a promising attempt to find the most idiotic date formats. There seems to be a not yet finally decided competition. “Aug '14” Is meant to mean “one day of august 2014”. My answer above was posted more than 7 years ago, At that time the software still was askbot (but already also used the funny “format”).

1 Like

If you hover the mouse pointer over the ‘dates’ more information is available.

If the document is set as Read Only that is probably because you opened it directly from an email attachment (and therefore it is stored in a Temporary folder, where you don’t want it to be). The proper way to edit a document is to Save the attached file to some organized folder you own and then Open the document for Editing.

Another important reminder: NEVER get an x.x.0 version. It will (most probably) have bugs and regressions. You should get the version with the highest 3rd digit (currently 4.2.6)

Example: in the Download page (at the very bottom) you will see

LibreOffice is available in the following released version

4.1.6
4.2.5
4.2.6
4.3.0

You should get either version 4.2.6 or 4.1.6 (older, with less features which you might or not need, but equally bug free)

Recommending any other version to your customers is doing a bad service to them, to the project and especially to yourself (because, as usual, if you recommend anything, any problem in the software is your fault and people expect YOU to fix it :slight_smile: )

I imported a form from an RTF file, which included a table, which had some part of its cells somehow protected. Saving this as .odt file did not help.

What did help is the following:

  • Save to a different format (e. g. MS Word 97/2000/XP/2003 (.doc)), that eventually does not support this protection.
  • Close LibreOffice Writer.
  • Open the new file (e. g. the .doc file) with LibreOffice Writer and test if the removal of the protection has been successful.
  • Save back to a .odt file.

I imported a DOC file whose content was protected. (And Insert → Sections, Format → Sections didn’t work, because it was grayed out. Neither did saving without a password and/or in the ODT format.)

What worked was the following:

  • Under Tools → Options → LibreOffice Writer → Formatting Aids → Protected Area activate “Ignore protection”.

Notes:

  • That will also remove protection from Table of Contents, etc. (if it was created as protected)
  • One might want deactivate it again after editing, to prevent unintended edits in future
  • I think I had to restart LO on the first activation, but couldn’t reproduce it later (doc becomes editable immediately) - your mileage may vary

Cannot upvote yet, but thank you nevertheless.

Thanks
For mac option was named “Protect form” and it was under
Tools → Options → LibreOffice Writer → Compatibility

@Kanape Thanks, it works for me on Linux too

This is what worked for me (tried the “clip from one char before…” suggestion above but that just refused me as well) :-

  1. Re-SAVE the document from Libreoffice in the “OPENOFFICE DOCX” format (the one right down at the bottom of the format selector - NOT Windows DOCX) ;

  2. The close and Open the resulting document anew: the locked section is now unlocked.

Small disruption to some centring but nothing problematic.

Good luck all

I see that this has been a problem for some time. I have a document that was created in MS Office. It has a table in it. A very simple table. I can open the document in MS Office and fill in the table. I can open the document in OpenOffice and fill in the table. When I open the document in LibreOffice, it claims that the cells cannot be written into and there is no way to change that. I have tried everything I have read here and elsewhere. LibreOffice is treating the table incorrectly and, as a result, this form and others like it cannot be used in LibreOffice. If anybody has a way to fix this (and I am starting to doubt that there is a fix given the back-and-forthing) I would appreciate having somebody tell me what it is. And I will tell you up front that the solutions which center on unprotecting the cells do not work because apparently LibreOffice, while it says the cells cannot be written into, does not have an option to kill the protection. In fact, there is no option presented no matter how much I right click.

Please upload a file showing the problem so that a proper analysis can be done otherwise suggestions will be little better than guessing.

Causes can include

1 The file is still attached to an email and is therefore opened in READ ONLY mode → click the Edit File icon

2 The file has a READ ONLY attribute → change the file attribute

3 A Section has been set to Write Protect → Format > Sections …

4 You have opened a document twice and LO is preventing you getting yourself into a mess so sets the second instance to READ ONLY

Fixed in master towards 5.4 in bug 105625.

Just in case somebody else comes here looking for a solution, like I have, this worked for me:

I selected the text I wanted to delete (but was getting this error), and Selected Format > Clear Direct Formatting. Then I was able to press the Delete key and this time the selected text was successfully deleted.

In my scenario, I had a footer that said for example, Page 2 of 1
I couldn’t delete the 1 to replace with the field PageCount (which it originally was - I don’t know how it got wrong, nor how it got locked). It may originally have been a Word document. I do always save my documents as Microsoft Word 2007-2013 XML (.docx)

Got this error message in LO 5.4.2.2 in Ubuntu 17.04.
In my case, it also said “read only” in the status bar at the bottom of the screen.

Solution: uncheck the following option
Tools / Options / LibreOffice Writer / Compatibility / Protect form

All other solutions failed for me.

I had the same error in a document converted from Word. This was the only solution that worked for me too.

On the mac,
you will find “protected form” under menu:
LibreOffice → Preferences → LibreOffice Writer → Compatibility
uncheck “protected form” and you should be able to work on the document again.

I found a solution for this problem. This happened to a particular cell while I was editing a table. I could get rid of it changing the size of the cell. I grabbed the top edge of the cell and dragged it down, and then I could edit it again. I don’t know if it will work for you, but it did for me. Nothing else did work, except for changing the size of the cell. I hope it works for you too. OBS. This happened between one page and another. I dragged the top edge down until the cell dropped to the next page.

Go to Tools > Options > LibreOffice Writer > Formatting Aids and under Protected Areas, uncheck Enable cursor.